Our life becomes more and more intelligent and smart,including the various areas of the home on the protection of water leakage has become increasingly important.
We found that most of the households neglected the risk and severity of water leakage at home.
It is important to know where it leaks and solve it in advance,our water detection sensor(which including position detection sensor controller alarm,this is 4 ways model and also non-position leak detection controller alarm-this is single way model) will help you prevent the dangers of water leakage in your daily life.
So where does the home need to install a leaky device? We will recommend:Near the washing machine,the kitchen corner,
in the basement where the main waterline enters the living room etc…
For how to choose the correct leak water detection sensor,we also have a lot of solutions for leak detection.
However,only a few cover all the necessary features to provide reliable detection.For us,the water detection sensor must meet
the following requirements:it must immediately detect water. Therefore, the measuring contact must be on the surface.
When water droplets or water drops on the leak detection rope, it immediately gives alert and inform the specific leaks,
allowing the water detection sensor and household to view and process in time.and an addressable water deterction cable and an alert convert is quite necessary installed,it hleps you to know where the exact position of the water leakage is;
Of course,if you won’t need to know the actual position or you could find it all by youself,then choose Non-locating water sensing version is also available for detecting,in this way,you have to check slowly from the start of the cable to the end where the cables installed once the water leaks,it will not indicate the actual leaking position,that’s the difference,pls check carefully before using.
https://prosinogroup.com/wp-content/uploads/2018/03/water-detection-sensor-1.jpg235800admin/wp-content/uploads/2024/02/prosino-logo2.pngadmin2018-03-20 12:52:222019-07-24 07:40:01How Important the Water Detection Sensor Is To Our Life
Water leaks are a common plumbing problem in homes and a water leak detector can help you catch a leakage when it first begins, thus preventing costly damage to your home.
Otherwise, plumbing leaks under sinks, around hot water heaters and in many other areas often go undetected for quite a while and in that time serious water damage can occur.
In addition to damaging your home,water leaks that go undetected for a while can lead to the growth of toxic mold. Mold often spreads rapidly from one area of the home to other areas and can end up costly thousands of dollars to remove.
In the meantime, mold puts you at risk for numerous health problems, including respiratory disorders and infections, allergic reactions, migraines, muscle and joint pain, and even digestive problems.
You can protect your home and your health by installing water sensors in leak-prone areas.
How a Water Leak Alert Controller Works?
It’s similar to a smoke detector, which has an sensor alarm that goes off if there is smoke in your home.
Instead of smoke, though, water leak controller detects the presence of water.
Most models have an audible alarm to alert you to leaks.
Some models can also be programmed to alert you by text message or email if a leak occurs, which can be especially useful if a leak develops while you’re not at home or away on vacation.
Some can even be connect to “smart home” systems and automatically shut off the water valve to prevent water damage when a leak is detected. A simple detector with an audible alarm works well enough for many homeowners, though, and is affordable even for those on a budget.
Where Should You Put a Water Leak Detector?
Normally the water leak detector are always collecting the signal or alarming from the end where the leakage is,thus a extra Water sensing cable will be necessary required by connecting with the leakage detector.
You can install one water leak detector only and with extend the cable length as required in your house,just install anywhere that water leaks are likely to occur. Common locations include near washing machines,by hot water heaters,by refrigerators with ice and water dispensers, under sinks,near toilets and near humidifiers.
These are also common areas for household mold.In this way,
Addressable(Position) leak detection wire will be your best choice.We especially recommend installing water leak detector in areas where you might not notice a leak when it first begins,for instance, if you clean your bathroom regularly, you’ll probably notice a leak behind your toilet.
If you do laundry frequently, you’ll probably notice a leak near your washing machine before it gets too bad.
If your hot water heater is in the basement or some other out-of-the-way place,though,you might not realize it’s leaking for some time.
If you don’t look under your kitchen sink often, you might not notice a leak there until quite a bit of water damage has occurred.
Protect yourself by installing detectors in these out-of-the-way areas.
You can install as few or as many detectors as you need in your home,based on your specific needs.
Many models are quite reasonably priced and they are easy to install, even if you’re not particularly handy.
https://prosinogroup.com/wp-content/uploads/2018/03/water-leak-detector.jpg235800admin/wp-content/uploads/2024/02/prosino-logo2.pngadmin2018-03-07 07:33:412019-07-31 07:25:33Water Leak Detector for Home Installation
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Google Analytics Cookies
These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.
If you do not want that we track your visit to our site you can disable tracking in your browser here:
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Other cookies
The following cookies are also needed - You can choose if you want to allow them: