3 Tips for using the Water Sensing Systems,In order to prevent your Valuable Assets and devices from water damage
1)where should the Water Sensing Systems be installed?
- Data Center or Serve Rooms
- Control Rooms,IT Facilities or Communications
- Storage/warehouse or Archive Areas
- Plant and Services Rooms
- Offices or other indoor areas where should be in dry
2)Where can a water leakage occur?
- Within the ceiling
- From the floor above
- From a room next to the washing closet
- From an adjacent room
- Within the floor void
3)How to Detect the leaks?
- Prepare the leak detection rope (Position or Non-positioning models)
- Spread the ropes and install next to the areas where the leakage may occur,
- Fixed with plastic cable fix clips,you may set the most fit distance such as 1 meter cable placed 1 piece of clip.
- An extra leak Controller Alarm is necessary.
- Connect the leak detection rope to the Controller by using Modular Lead Cable and connectors.
- The cable length could be fixed as required.
- Connect with power supply to the controller,switch on the alarm.
- Set the right sensibility for water leak detects.