What is Water Leak Detection System (WLDS)?
- Water leak detection system is a device when installed in facility, then it detects water leak at initial stage and inform user by indicating audible alarm,message etc. Leak detection system consist of leak detection controller Panel and sensor alarms.
- Depending on requirement Leak detection panel can be single way system of Multi-zone system,single way system can protect one area or zone since single way water leak detection controller alarm consists on only one sensor terminal.
- While multi-way system can protect multi areas or zones since it consists of more than one sensor terminals.
- Sensor are actual Leak Detectors,the multi detector model can be have as many as 4-way housing.
Water Leak Detection Controller Panel(Position and Non-Position):
- There are different type of leak detection controller alarms depending on number of zone,it can protect and nature of leakage detection. Depending on water leak alarm system divided in two types,for Example,Single way and Multi-way water leak detection equipment.
- Depending on nature of leak detection it divided in positioning indicate water leak detector and Non-Locating indicate water leak detector system.
- For the Position system model can detect with exact leakage position,and indicates exact distance on controller panel,
- While Non-Position system can simply detect leakages only without indicating with actual leakage position.
Leak detection control panel Mainly of following type:
- Position System: Along with position read type of system only cable type sensor can be use as leak detector,this system can be single way type of multi-way type.
- Position indicate system shows exact location of leak across length of sensor cable,when water drops comes in contact with sensor cable twisted pair of cable get shorted through leaked water.
- Depending on value of current (which depend on length of cable due to resistance of cable) which flows through shorted pair of sensing cable,leak detection controller alarm calculate length of cable at which water came in contact with water.
- This leakage position is leak location.
Singe Way Leak Detection Control Panel:
- As name suggest this type of system can perform leak detection over one area or zone.
- This system provided with only one terminal to connect sensor.
- Single way Control Panel can be of distance read type also.
Multi-way Leak Detection Control Panel:
- As name suggest this panel can perform leak detection over various zone of areas.
- Traditional Multi-way system has one terminal per zone to connect sensor.
- But in some other system there is only one terminal to connect sensor cable and zone created depending on length of sensor cable
- By programming through software(We call this MODBUS) from LCD panel of Leak Control Alarm.
Water Detection Sensor Is Important To Our Life
- Nowadays.
- Our life becomes more and more intelligent and smart,including the various areas of the home on the protection of water leakage has become increasingly important.
- We found that most of the households neglected the risk and severity of water leakage at home.
- It is important to know where it leaks and solve it in advance,our water detection sensor(which including position detection sensor controller alarm,this is 4 ways model and also non-position leak detection controller alarm-this is single way model) will help you prevent the dangers of water leakage in your daily life.
- So where does the home need to install a leaky device? We will recommend:Near the washing machine,the kitchen corner,
in the basement where the main waterline enters the living room etc… - For how to choose the correct leak water detection sensor,we also have a lot of solutions for leak detection.
- However,only a few cover all the necessary features to provide reliable detection.For us,the water detection sensor must meet
the following requirements:it must immediately detect water. Therefore, the measuring contact must be on the surface. - When water droplets or water drops on the leak detection rope, it immediately gives alert and inform the specific leaks,
allowing the water detection sensor and household to view and process in time.and an addressable water deterction cable and an alert convert is quite necessary installed,it hleps you to know where the exact position of the water leakage is; - Of course,if you won’t need to know the actual position or you could find it all by youself,then choose Non-locating water sensing version is also available for detecting,in this way,you have to check slowly from the start of the cable to the end where the cables installed once the water leaks,it will not indicate the actual leaking position,that’s the difference,pls check carefully before using.
Water Leak Detector for Home Installation
- Water leaks are a common plumbing problem in homes and a water leak detector can help you catch a leakage when it first begins, thus preventing costly damage to your home.
- Otherwise, plumbing leaks under sinks, around hot water heaters and in many other areas often go undetected for quite a while and in that time serious water damage can occur.
- In addition to damaging your home,water leaks that go undetected for a while can lead to the growth of toxic mold. Mold often spreads rapidly from one area of the home to other areas and can end up costly thousands of dollars to remove.
- In the meantime, mold puts you at risk for numerous health problems, including respiratory disorders and infections, allergic reactions, migraines, muscle and joint pain, and even digestive problems.
- You can protect your home and your health by installing water sensors in leak-prone areas.
How a Water Leak Alert Controller Works?
- It’s similar to a smoke detector, which has an sensor alarm that goes off if there is smoke in your home.
- Instead of smoke, though, water leak controller detects the presence of water.
- Most models have an audible alarm to alert you to leaks.
- Some models can also be programmed to alert you by text message or email if a leak occurs, which can be especially useful if a leak develops while you’re not at home or away on vacation.
- Some can even be connect to “smart home” systems and automatically shut off the water valve to prevent water damage when a leak is detected. A simple detector with an audible alarm works well enough for many homeowners, though, and is affordable even for those on a budget.
Where Should You Put a Water Leak Detector?
- Normally the water leak detector are always collecting the signal or alarming from the end where the leakage is,thus a extra Water sensing cable will be necessary required by connecting with the leakage detector.
- You can install one water leak detector only and with extend the cable length as required in your house,just install anywhere that water leaks are likely to occur. Common locations include near washing machines,by hot water heaters,by refrigerators with ice and water dispensers, under sinks,near toilets and near humidifiers.
- These are also common areas for household mold.In this way,
- Addressable(Position) leak detection wire will be your best choice.We especially recommend installing water leak detector in areas where you might not notice a leak when it first begins,for instance, if you clean your bathroom regularly, you’ll probably notice a leak behind your toilet.
- If you do laundry frequently, you’ll probably notice a leak near your washing machine before it gets too bad.
- If your hot water heater is in the basement or some other out-of-the-way place,though,you might not realize it’s leaking for some time.
- If you don’t look under your kitchen sink often, you might not notice a leak there until quite a bit of water damage has occurred.
- Protect yourself by installing detectors in these out-of-the-way areas.
- You can install as few or as many detectors as you need in your home,based on your specific needs.
- Many models are quite reasonably priced and they are easy to install, even if you’re not particularly handy.