Fuel Leak Detection Wire

Model:P-LFP7000

The Fuel Leak Detection Wire is engineered to deliver reliable performance in both indoor and outdoor settings. First, its waterproof connectors provide immunity to short-term water immersion, ensuring consistent functionality in varying conditions. Additionally, the encapsulated version is designed for long-term water immersion, making it ideal for demanding environments. Furthermore, the UV-resistant cable protects against prolonged exposure to sunlight, which is essential for outdoor use. To enhance durability, the cable also incorporates anti-termite and anti-rodent properties, preventing damage caused by pests over time. As a result, this advanced construction makes it particularly suitable for tropical applications, where harsh weather and environmental challenges are common.

Fuel Leak Detection Wire main features:

Wide range of applications including:Fuel Oil storage tanks,trenches,sub-floor,sumps and Pipelines etc
Fast typical response time
Various fuel types could be detected such as:Gasoline,Diesel Oil,Kerosene,Heavy/Light Crude Oil etc
Repeat use,can be used for 3 times, the leakage should be cleaned by original manufacturer after fuel/oil detects
Fully passive construction, guaranteed service life of 20+ years

Get a Quote

Specifications

Product Name	Fuel Leak Detection Wire
Model	P-LFP7000
Cable Diameter	10mm (0.393inch)
Cable weight	5.5 kg/100 m
Operating temperature	–20°C to 60°C (–4°F to 140°F)range
Pull force limit	Not to exceed 22.7 kg (50 lb)
Bend radius	50 mm (2 in) minimum
Pressure	Loads greater than 9 kg (20 lb) per linear inch at 20°C (68°F) may immediately trigger an alarm

Fuel Leak Type	Response Time
Unleaded Gasoline	2 Minutes
Diesel Oil	3 Minutes
Light Crude Oil	30~60 Minutes
Heavy Crude Oil	30~60 Minutes
Kerosene	30 Seconds

Reused Time	Can be used for 3 times, the leakage should be cleaned by original manufacturer after fuel/oil detects.
Operating Life	20+ years at 40°C (materials tested in natural aging conditions)
Weight	120 g/meter max.
Fire Rating	Non-flame propagating
Connector Ingress Rating	IP68 – suitable for outdoor/direct burial
Operating Temperature Range	-40°C to +85°C
Recommended Maximum Section Length	30 meters / 100 feet
Hazardous Locations Classification	IS/ I/ 1/ ABCD/ T4 ; I/ 0/ AEx/ ia IIC T4 ; Class I, Zone 0, Ex ia T4 Class I, Div. 1, Groups A,B,C,D; T4 II 1 G Ex ia IIC T4 Ga

Product Overview

The P-LFP7000 sensing cable features advanced construction that guarantees exceptional mechanical strength and resistance to both corrosion and abrasion. Designed to excel in critical applications, it includes two sensing wires, two alarm signal wires, and a jumper wire embedded within a specialized carrier rod. To enhance reliability, the integrated alarm module continuously monitors the sensing cable for continuity, ensuring consistent performance. Thanks to its rugged design, the cable has no exposed metal, allowing it to be reused even in harsh and corrosive environments. This durable construction delivers long-term reliability and efficiency, making it suitable for demanding conditions.

The fuel leak wire is equipped with all the necessary wiring for long-range applications, enabling the connection of multiple sensors in series to the Fuel Leak Module P-FLD2. For use in hazardous areas, the sensor cable must be connected to an intrinsically safe acquisition module or, alternatively, routed through a Zener barrier to a sensor module or panel located in a safe zone,designed for both safety and efficiency, this setup ensures reliable performance in critical environments