Fluid Sensing Cable

Fluid Sensing Cable with 4 important points

This is Frank from Prosino Group,you could lean our water leak detection system or water leakage detection cable/controller sensor

Today I would like to share the information about water leakage

Most of water leakage was happening indoor or outdoor

The indoor applications as below:

  • Airports,Banks,Churches,Clean Rooms,Correctional Facilities,Hospital,Hotels
  • Medical Facilities,Nursing Homes,Office Building,Residential Facilities,
  • Retail,Schools,Telecommunications, Theaters,University,Warehouse and so on
  • the outdoor applications:most of water leakage happening is piping system
  • I am good at indoor water leakage detecting, It is our company Prosino Group’s mission to make the world a safer place
  • Not only in EU and US,But also in all of the world Fluid sensing cable or water leakage detection cable
  • was widely used in environment monitoring system,it is specially in server room,data center,water tank and more

Now I am here to introduce the product of fluid sensing cable.

There are 2 versions of water leak detection cable .

1)P-LFP1000-Addressable (position) water leak detection cable.

  • Each meter with 13 ohm resistance
  • The diameter is 6.0 mm
  • 4 wires fluid sensing cable
  • The color could be customized expect the 2 black sensing wire
  • The length could be customized according to request
  • We suggest 10 meters,15 meters,20 meters,the functions per each wire as below photo



2)P-LFP1B-Non position fluid sensing cable

  • The diameter is 6.0mm or 4.5mm
  • 2 wires water leakage detecting cable
  • The color could be customized expect the 2 black sensing cable
  • The length could be customized according to the request

Below are the liquid leakage detectors

There are also 2 versions of liquid leakage detector (alarm)

1)P-LFP1-Position controller

  • Able to detect the distance as long as 1,000 meters and the tolerance is 0.5%,it is with RS485 and switch output
  • It is addressable water leakage detector
  • It is with RS485 and switch output
  • RS485 output which is communicating with computer or monitoring host,it is always with 2 RS485 connectors,1 pair for input,another pair for output(if you would like to combine with more RS485 devices)
  • Switch output,which is communicating with other equipment
  • Tolerance is 0.5%
  • Power supply : Between : 5V -24V
  • There are 3 LED lights
  • Power —– It is power light
  • Service —— It means breaking. Or the cable did not connected well
  • Leak ——- When the leakage is happening . The light will flash
  • RS485 . B- A+ B- A+ . It is 2 pairs of RS485 connectors
  • Alarm Replay . It is switch output only available with the device,which power is between 5V- 24V,It is with N.O,N.C,COM
  • It is always only connect 2 cable,The method as below:
  • and COM,or N.C and COM,Power of both of N.O,and N.C device is between 5V-24V
  • When the cable detected the leakage is happening,after you push the “confirm “button . The “ leak” led light will turn off
  • And the leakage position will bed disappeared
  • So please record the leakage position and inform the staff to handle the leakage before you push “ confirm” button
  • When you push the second time “ confirm “ button . It is normal working
  • I would like to enclosed the full addressable water leak detection system photo:




2)P-FP1A-Non position alarm

  • Non-position water leak detector
  • The sensitive button-There are 3 models of sensitive,Low,Middle,High
  • This model is single way non position water leak detector
  • VCC and GND-It is for power . VCC means V+ , GND means V-
  • RS+ , RS-  -Please make sure it is correct connection
  • Here I am also would like to enclosed the full non position water leak detection system:





Conclusion .

Position water leak detection system

  • Power supply (5V-24V) + Position detecting alarm +Lead cable + addressable fluid sensing cable +clearing end

Non position water leakage detect system

  • Power supply (5V-24V) +non position detecting alarm +Lead cable + fluid sensing cable + terminal
  • If you would like to contact me,Please email to: frank@prosinogroup.com